top of page


Ultrasonic ultrasound condition monitoring, Predictive maintenance equipment, Ultrasonic ultrasound leak detection Australia, Handheld ultrasonic ultrasound instruments, Online monitoring systems for plants, Airborne, ultrasound ultrasonic inspection, Bearing fault detection tools, automatic bearing lubrication, Steam trap testing equipment, Ultrasonic maintenance technology, Industrial asset monitoring systems, Powering Predictive Maintenance with Ultrasonic Precision, problem-solving, reduce downtime, precision diagnostics, bolt stress measurement, bolt strain measurement, bolt elongation measurement, 30+ Years in industrial reliability, Local expertise in QLD, SA, VIC & WA, Authorised UE Systems distributor, Industry-trusted products and training, Technical support and on-site consulting, predictive maintenance, life cycle monitoring, vibration analysis, vibration monitoring, Manufacturing, Mining, Oil & Gas, Food Processing, Subsea, power Utilities, water utilities, Inspecting Heat Exchangers, Boilers, Condensers, Determining CFM loss, calculating energy savings, recording and reporting survey results, Electrical Inspection, Safety Considerations, Overview of Types of Electrical Equipment, Voltages Defined Acoustic Effects Versus Heat Generated Defects, Integration of Ultrasound and Infrared Methods
Detection Methods for High Voltage Equipment, Overview of Equipment for High Voltage Inspection, Detection Methods, Confirmation Methods, Substation Inspection, Radio Frequency Interference, Television Frequency Interference, Detection Methods for Low Voltage Inspection: Techniques, Contact Approach, Mechanical Inspection, Valves, Compressor Inspection, Hydraulic Valves, Steam Trap Inspection, Steam Applications, Steam Trap types, Acoustic properties, Inspection Techniques, Recording and reporting, Mechanical Inspection, Considerations of Ultrasonic Generation, Strategies of Mechanical Inspection, Review of Proactive and Predictive Maintenance Concepts, Troubleshooting Methods Overview, Trending Methods Overview, Inspection of Compressors, Gears, Pumps, Motors & Fans, Isolating Sound Sources
Bearing Inspection, Trending Concepts, Condition-Based Lubrication, Lubrication Starvation, Over-Lubrication, Levels of Failure, Monitoring, Data Logging and Sound Recording methods, Connecting to Recording Devices, Vibration Meters and Computers
Sound Spectral Analysis, Recording and Reporting Results
DMS Software Overview and Route Generation, Airborne Ultrasound Technology, Applications and Methods, Airborne Ultrasound Inspection, Supervisors, Energy Auditors, Service Company personnel who perform PDM, energy audits, leak detection, ultrasonic predictive maintenance in australia

training ian  32.04 (002).jpg

Video using Ultraprobe 15000 in bearing testing. 

Video using Ultraprobe 9000 for bearing testing 

up15-electrical-1000x830-1.png

Application training on UE Systems equipment

Cert 1.JPG

UE Systems certified ISO training Level-1

Cert II.JPG

UE Systems certified ISO training Level II 

Training dates here

Technical and Product Training

Ultra-Tek prides itself on its world class products but without quality training the potential returns may never be achieved, or as a minimum, have a greatly extended return on investment.

​

We therefore have compiled some key training offerings to enable our products and technology so that you get the results from your Ultrasound program right from the start.

These are all delivered onsite at the clients' facility.

 

UE Systems Product & Software Orientations Training [1 Day]

This one-day course is designed as the minimum start-up package for new clients. It will make users conversant with the many features of their Ultraprobe Instrument and also of the Data Management Software (DMS) and Spectralyzer diagnostic software platforms. It is delivered in a classroom style environment with a high level of hands-on practical work to embed the processes learned.

​

​

Note: The Spectralyzer product is best suited for Ultraprobe UP10000 and Ultraprobe UP15000 Touch users

 

UE Systems Ultrasound Overview & Applications Training [1 Day]

For clients that are already comfortable with the use of their Ultraprobe and software, this one day course is specifically focuses on the Technology and Applications of Ultrasound. It will help users understand how ultrasound works, detail the many inspection techniques and contains plenty of case histories on applications from the five main focus areas:

​

  • Electrical Inspection

  • Leak Detection

  • Valve Inspection

  • Steam Trap Inspection

  • Bearing Inspection

 

It also contains a section on Condition Based Lubrication using Ultrasound to optimize your lubrication program and usage hence generating immediate returns to the program. This course is a 50:50 split between the traditional classroom style environment with a high level of hands-on practical work out in the plant to embed the processes learned.

​

​

 

UE Systems Technology Implementation Training to suit the Ultraprobe UP3000 and Ultraprobe UP9000 [2 Day course]

​

This two day course is the most popular of all our training offerings for new purchasers of the Ultraprobe UP3000 and Ultraprobe UP9000 instruments. It is a combination of both 1 & 2 above.

It will jump start your Ultrasonic Inspection Program by having knowledgeable Ultraprobe users targeting the right applications in the correct manner to achieve the best results. This delivers the most rapid return on investment and comes highly recommended.

​

​

 

UE Systems Technology Implementation Training to suit the Ultraprobe UP10000 and Ultraprobe UP15000 Touch [2 ½ Day course]

This two and a half day course is the most popular of all our training offerings for new purchasers of the Ultraprobe UP10000 and Ultraprobe UP15000 Touch instruments. It is a combination of both 1 & 2 above.

It will jump start your Ultrasonic Inspection Program by having knowledgeable Ultraprobe users targeting the right applications in the correct manner to achieve the best results. This delivers the most rapid return on investment and comes highly recommended.

​

​

 

UE Systems Level I & II Ultrasound Certification Training

[5 day courses]

​

Airborne Ultrasound is a nondestructive test. The effectiveness of airborne ultrasonic tests depends upon the capabilities of the personnel who are responsible for and perform inspections.

Certification is a written documentation of qualification. Certification is evidence that personnel performing airborne ultrasound possess knowledge and understanding of the test method and also gives the inspector the confidence needed to perform the inspection to the highest level of success.

In order to meet the requirements of ISO Cat 1 & ISO Cat 2 certification in line with ISO 18436   Written Practice, SNT-TC-1A, specific topics must be addressed in the classroom training. The recommended hours of instruction is 32 hours for Level I and 32 hours for Level II. Requirements for Level I, II, and III Certification In order to achieve an official certification, classroom training meeting the requirements of SNT-TC-1A must be completed along with successfully passing the General, Specific and Practical examinations with a score of 80% or better.

​

Documentation of education or experience must be maintained annually. Hearing acuity must meet the minimum requirement of one ear of less than 25dBHL at 500 Hz to 4 kHz (with or without aid.) Hearing acuity examinations must be documented annually.

​

Click here to view the training details for the Level I Training

 

The Level II Training is an advanced version of Level I.

This 32 hour course is designed to meet the intent of SNT-TC-1A. Students successfully completing this course are familiar with the scope and limitations of Airborne/Structure Borne Ultrasonic Inspection, are able to set up and calibrate equipment, interpret and evaluate results with respect to applicable codes, standards, and specifications, and organize and report inspection results. Course content consists of advanced theory, data collection, inspection techniques, and reporting. A General, Specific, and Practical test is given at the end of the course.

Technical Support

Ian         0448 901 774 (SA, NT, TAS, VIC)

Mule      0419 794 036 (QLD, NSW)

Gerard   0400 828 613​ (WA)

U5 / 2-4 Maiella Street

Stapylton QLD 4207

Australia

115437387.png

Ultra-Tek

Ultra-Tek is not only Australia's leading supplier of precision monitoring and ultrasonic testing equipment; we also provide field services and ISO accredited training to our leading mining, petrochemical, oil & gas, power generation, food & beverage, pharmaceutical, aviation, and defence industries.


Proudly Australian owned and staffed by seasoned industry-leading technicians, not salespeople, we know what works, but just as importantly, what doesn't. 

 

To deliver tangible results through effective condition monitoring, with proven methods developed over decades of field work; that is our commitment to you.

Site Privacy Policy   

We respect your privacy and do not sell or share private information, IP Addresses or any other personal information with any third party. The only information we record is the number of visits to our site without linking it to any individual visitor and again we do not share that with any third party. 

© Copyright 2025 Ultra-Tek

​

bottom of page